11/2 Inch Stainless Steel Air Operated Pneumatic Water Oil Lotion
Acid Transfer Double Diaphragm Pump
INTRODUCTION
Stainless Steel diaphragm pump is used where there is a demand for
high pumping performance, combinations of both hot and corrosive
fluids, both acidic and alkali. They are the ultimate choice for
durable long life performance.
RV offers some class leading diaphragm materials in combination
with these pumps to tackle some of the most difficult pumping
applications.
| Max Working Pressure | 120 psi(0.84Mpa, 8.4bar) |
| Max Flow Rate | 90gpm(340lpm) |
| Max Reciprocating Speed | 200cpm |
| Max Suction Height (Dry Sucking) | 5m |
| Max Permitted Grain | 0.2 inch (5mm) |
| Max Air Consumption | 80scfm(90L/s) |
| Air Inlet Size | 1/2inch |
| Air Outlet Size | 3/4 inch |
| Fluid Inlet Size | 1-1/2inch |
| Fluid Outlet Size | 1-1/2 inch |
| Net Weight | Stainless Steel 30.7 kgs |
| Type of Diaphragm | IMAGE | Typical Usage |
| PTFE |  | Excellent choice when pumping highly aggressive fluids such as
aromatic or chlorinated hydrocarbons, acids, caustics, ketones and
acetates.
Temperature range +4°C to +104 C (+40 F to +220F) |
Packing & Shipping:
DIAPHRAGM OPTIONS
PTFE
Santoprene
Buna-N
Hytrel
Viton
Neoprene
VERSATILITY
This air diaphragm pump handles viscous fluids, slurries, solid
laden fluids, no priming needed, no foaming of fluid pumped, no
stall damages, portable
INSTALLATION
Be sure the mounting can support the weight of the air diaphragm
pump, hoses, and accessories, as well as the stress during
operation progress.
During installation, make sure that the air diaphragm pump has been
fixed with bolts on the mounting feet.
In order to facilitate the operation and maintenance, the
maintenance space should be enough during installing the air
diaphragm pump.
While fastening the air diaphragm pump, rubber pad can be padded to
reduce the noise and vibration during operation.
